What does the LED status indicator on my Samsung Jet Bot Combo mean?

Understand the LED status indicators on your Samsung Jet Bot Combo and Clean Station to identify charging, battery, maintenance, and error conditions.

The LED status indicator on your Samsung Jet Bot Combo and Clean Station provides real-time feedback about charging, battery levels, maintenance needs, and system errors. This guide explains what each LED color and pattern means to help you troubleshoot and maintain your device effectively.

1. What does the LED indicator mean while the Jet Bot Combo is operating?

During normal operation, the LED indicator on the Samsung Jet Bot Combo shows different colors and patterns depending on its status:

1. Blinking red without moving: Indicates that an error has occurred. Check for obstacles, sensor issues, or connectivity problems.
2. Blinking red while moving: The Jet Bot Combo is returning to the Clean Station due to a low battery.
3. Solid red: The Jet Bot Combo has a low battery and needs recharging.

2. What does the LED indicator mean while the Jet Bot Combo is charging?

During charging, the LED indicator displays different colors to show the charging progress:

1. Solid red, orange, or yellow: The Jet Bot Combo is currently charging.
2. Solid green: Charging is complete.
3. Solid violet: A software update is in progress.

-During the first 20 minutes of charging, the LED status indicator will turn red.

-If the battery has been completely depleted before charging begins, the LED status indicator will turn red and blink for about 20 minutes.

3. What does the LED indicator mean during night mode?

The Jet Bot Combo's night mode (18:00 to 06:00) operates only when the device is charging. In night mode, the LED brightness is adjusted to 20% within the set time when using a phone.

4. What does the LED indicator mean for the Clean Station?

The Clean Station also uses LED indicators to communicate its status:

1. Solid white for 5 seconds: The Clean Station is turned on.
2. Solid white: The Empty Dust function is on, the Jet Bot Combo is charging (1 minute after it has been turned off), or the Clean Station is cleaning and drying the mops.
3. Blinking red: The Fine Dust Filter requires cleaning or the Dustbin lid is open.
4. Solid red: The Dust Bag or Waste Water Tank is full, the Clean Water Tank inside the Clean Station is empty, or the Clean Water Tank, Waste Water Tank, or Washboard has not been installed correctly.

5. Additional things to check

-Ensure the Jet Bot Combo is properly docked with the Clean Station for accurate LED feedback.

-Regularly clean the Fine Dust Filter to prevent blinking red warnings.

-Check the Dust Bag and Waste Water Tank regularly to avoid solid red warnings.

6. Supported Samsung Jet Bot Combo devices

This guide applies to the following Samsung Jet Bot Combo models:

- Samsung Jet Bot Combo (latest models)

7. Related Samsung support topics

-How to troubleshoot Samsung Jet Bot Combo connectivity issues

-How to clean and maintain the Samsung Jet Bot Combo mop pads

-How to update the software on your Samsung Jet Bot Combo